Barrels Per Minute and Rate Meter Combined
The BPM meter has both rate and barrels per minute
combined in one unit. It's a single pump meter.
The
Model PSS-5700-1 Rate Meter monitors the total strokes and
strokes per minute (SPM) for 1 pump. The PPS-5700 has 1 micro
controller,
pic12c672 and 2 LCD display drivers PCF8577cp. Compare
this to other digital types that may have up to 20 or more
parts needed to perform the same functions.
After 5 minutes of inactivity the pump section will go
to standby. The count is held in memory, even during
standby. As soon as the PSS-5700 detects a stroke the LCD’s
will power up and the count and strokes per minute will
resume. The rate display is updated with every stroke.
This save battery life.
Our rate meter uses 4 AA lithium batteries and allows
you to replace them in the field saving you expensive
replacement battery pack cost.
These units have been used in the field since 1999.
Rate Meter Features at a glance:
- Embedded CPU [PIC12C672]
- Large 1" x 2 ½" LCD Displays
- Auto Power On/Off
- Auto Shutdown (Sleep Mode)
- Push Button Reset Pump Strokes
- Auto Clear SPM
- Independent Pump Circuits
- Long Life Lithium Battery
- Standard 3-pin Plug
- Stainless Steel Case (Nema 4x)
- Intrinsically Safe Design (Class 1, Division 1,
Group A,B,C and D)
- 20ua Draw (Shutdown Mode)
- Power Internal Battery ( 6Vdc )
- SPM ( 6 - 350 )
- Count ( 0 - 9999 )
- BPM calibration set by "Total strokes per
barrel"




Contact Us for additional information or for a
quote.